EASY-FIT Fluoride Reduction Filter System
There is an increasing awareness of the detrimental effects of the long term ingestion of fluoride, often added to the water in the form of hexafluorosalicic acid. If you are concerned, here is an easy, cost effective way to remove fluoride from your water….
✔ No need for any other fittings or taps
✔ Reduces fluoride
✔ Makes all the cold water from your kitchen tap filtered of fluoride
For simple, cost effective, efficient and high performance reliable NSF Certified quality water filtration housing and filter solution without the need for a separate tap or a 3 way tap or a self-piercing saddle valve and any other installation parts, the EASY-FIT Fluoride Reduction Filter System just fits directly on to your 15mm pipework with push-fit connectors and represents the perfect solution.
This Fluoride Cartridge uses fine white granular media designed to reduce or completely remove fluoride levels. This cartridge is perfect for those who are concerned about their levels of fluoride intake and want to reduce this from tap water.
It is not possible to say give a definitive percentage of the fluoride that is removed from your water as the removal efficiency will depend on a number of factors such as temperature, pH, water quality, flow rate, and concentration of suspended solids. However, the cartridge has an absorption capacity of 10 mg fluoride/g or 500mg/l so under optimal conditions (where the UK limit is 1.5 mg/l) may be fully effective at removing all the fluoride compounds.
We would recommend the cartridge should be changed every 6-12 months (or 5000 gallons) whichever comes first.
Fluoride Reduction Filter – How it works
The Watts Flowmatic filter housings with buttress threads for 9-3/4 in. filter cartridges are made from NSF and FDA grade materials, manufactured from the highest quality, FDA grade, 100% polypropylene and acrylic styrene. They have a leak-proof sealing, accomplished by compression against a top seated EPDM o-ring located in the housing’s sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Polypropylene construction provides excellent chemical resistance with most acids, alcohol, ammonia, oils, plating solutions and many aggressive chemicals.
Fitting is simple, just remove a small section of your existing 15mm pipe and push the ends into the housings push-fit connectors. That’s it!
The Watts EZFITPRO-100 Inline 15mm push fit water filter system has the following dimensions:
Height (including bracket): 340mm
Width (at widest part): 115mm
Depth (at widest part): 115mm
Enjoy safe water with confidence!