Osmio INDRA-PRO 300 Undersink Filter Kit & Tap

Osmio INDRA-PRO 300 Undersink Filter Kit & Tap

This is one of the best inline water filter system from Osmio Water having the same filter cartridge arrangement as the EZFITPRO-300 but comes as a complete kit including a quality single dispenser filter tap. Whereas the EZFITPRO-300 fits directly on to the 15mm supply pipe and filters all of the water coming through to your kitchen tap, the Osmio INDRA-PRO 300 is connected by means of pipe connector and 1/4″ filter hose and is used purely for the drinking water supply resulting in a longer period between filter replacements.

* Included are a high quality ceramic valve, chrome plated water dispenser tap, a high quality dual housing and two high performance filter cartridges for a removal of a wide range of chemicals, heavy metals, bacteria, and limescale – see below for full explanation.

The system employs two filter cartridges which both serve a seperate purpose, resulting in reliably safe purified, clean, healthy and great tasting water.

Filter 1:  Coldstream CF108W Ceramic Water Filter Cartridge 2.9″ x 9.75″ OBE – changed every 6 -12 months

✓ Made in the UK by world leading manufacturer

✓ >99.9999% removal of bacteria and cysts

✓ Long lasting and easily changed

The Coldstream CF108W is a high performing ceramic cartridge which is capable of fluoride removal as well as chlorine, heavy metals and bacteria and cysts, making it the most powerful ceramic cartridge currently on the market. This filter can be a direct replacement for any 2.5 x 10 Inch cartridge and comes with rubber washer rings to ensure it will fit any housing.

Operating Performance:

Working Pressure (for pressure use)-

Minimum:      10 Psi

Maximum:   125 Psi

Working parameters:

Working temperature range:   5 – 30oC Working ph range 5.5 – 9.5

Suitable for gravity filters:     No

Recommended change frequency:  6 months (will vary with water conditions & useage rates)

Nominal Flow rate** :      To achieve maximum performance Litres / minute 2.84 US gallons / minute 0.75

Capacity Before replacement to guarantee performance Litres:   3000 US gallons 792

Contaminant Removal:     Pathogenic Organisms % Bacteria Removal Rate E.Coli / Cholera / Shigella / Typhoid /       Klebsiella Terrigena 99.9999% % Cyst Removal Cryptosporidium / Giardia 99.9999%

Trace Organics Removal*** Volatile Organic Contaminants 99.90% Lead removal 93.20% Heavy Metal      Contaminants 99.90% Pesticide Contaminants 99.90% Herbicide Contaminants 99.90% Excluding Lead , Nickel and Zinc

Inorganics Removal:  Free Chlorine Removal @ 2 ppb presence* 99.90% Chloramine Removal @ 3 ppb presence* 99.90% Fluoride Removal @ 8 ppb presence* 25.00%

Size:     Length 9.75″ Diameter 2.9″ Fitting OBE Fitting Length N/A

** (defined mean flow, Typical range +25% -20%) *** Product tested by Envirotech Laboratories inc to NSF53 standard a Antimony, Arsenic, Beryllium, Bismuth, Chromium, Mercury,Selenium

Filter 2: The Osmio Limescale & Chlorine Filter –  changed every 3-6 months (dependent on hardness)

Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction

De-alk resin – for temporary hardness and heavy metal reduction

The Osmio 2.5 x 10 Limescale & Chlorine Filter Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which appears as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use

Filter reminders-

By buying this product online, you will receive automatic filter reminder emails every 6 months so you do not need to worry about remembering when to change them.

System Dimensions:

The system will easily fit under your kitchen sink. See the dimensions shown below:

Osmio INDRA-PRO 300 Undersink Filter Kit & Tap – what is included?

The kit includes everything you need to get the system up and running and is easy to install.

The full kit includes:

1 off 10″ Dual Housing with 1/2″ BSP Brass Female Ports

1 off Coldstream CF108W Ceramic Water Filter Cartridge 2.9″ x 9.75″ (filter 1)

1 off Osmio Limescale & Chlorine FIlter (filter 2)

1 off Euro Design Faucet

1 off 1/2″ (male-female) Feed In Valve with 1/4″ Adaptor

2 off 1/2″ Male to 1/4″ Push Fit

2 metres of 1/4″ Tubing

If you would like a single kitchen tap which connects your hot, cold and filtered water in one stylish solution, you also have the option to buy this great water filter system with any of our Osmio 3 Way Triflow Taps

Download the Osmio INDRA Water Filter System Installation Guide