Pentek 5 Micron CFB-PLUS-20 2.5 x 20 Inch Carbon Block
SKU: CFB-PLUS-20![](https://puriflowfilters.co.uk/wp-content/uploads/2009/06/manufacturers-m-560-download.jpg")
Pentek 5 Micron CFB-PLUS-20 2.5 x 20 Inch Carbon Block
The CFB-Plus Series cartridges are an enhanced version of the CFB products, offering the same benefits but with even greater chlorine taste & odour reduction and the highest sediment reduction found in a carbon cartridge.
CFB-Plus Series products are modified moulded blocks manufactured using Pentek proprietary Fibredyne filter technology. This technology creates a unique filter media by attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix resulting in a filter cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge.
Fibredyne’s carbon block technology also offers up to twice the chlorine taste & odor reduction and dirt-holding capacity of traditional blocks (based on manufacturers internal testing). Additionally, this technology will not release fines into the effluent stream due to a unique post-filtration layer that is fused to the carbon/fibre media blend.
CFB-Plus Series cartridges are manufactured entirely from FDA-compliant materials, making them an ideal choice for a wide range of residential, food service, commercial and industrial applications.
Tested and Certified by NSF International to NSF/ANSI Standard 42 for materials requirements only.
Specifications
| Model | Pentek CFB-PLUS-20 2.5 x 20 Inch Carbon Block |
|---|---|
| SKU | CFB-PLUS-20 |
| Brand | Pentek |
| Filter Parameter | No |
| In Depth | Product code: CFB-PLUS-20
Filter size: 27⁄8″ x 20″ (73mm x 508mm) Micron Rating: 5 micron nominal Initial ΔP (psi) @ Flow Rate (gpm): 1.6 psi @ 2 gpm (0.7 bar @ 7.6 Lpm) Chlorine Taste & Odor Reduction @ Flow Rate (gpm): >20,000 gallons @ 2 gpm (>75,700 L @ 7.6 Lpm) Temperature Range: 40-180°F (4.4 – 82.2°C) Materials of Construction: WARNING: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the unit. NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system registration or certification for health-related contaminant reduction claims. NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be flushed with sufficient water to remove all traces of fines prior to using the water. NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5 ppm breakthrough. |
Reviews
There are no reviews yet.