Omnipure SCL10 Chlorine Filter With Scale Inhibitor

SKU: Omnipure SCL10

£29.99

Omnipure SCL10 Chlorine Filter With Scale Inhibitor The Omnipure SL10 is a 2″ x 10″ Granular Activated Carbon and Polyphosphate Inline Filter. It is highly effective at reducing chlorine and other chemical disinfectants and pesticides and inhibiting scale. This filter has Polyphosphate Build in (supplied as standard)... More description

In stock

Add to Wishlist
Add to Wishlist
Compare

Omnipure SCL10 Chlorine Filter With Scale Inhibitor

The Omnipure SL10 is a 2″ x 10″ Granular Activated Carbon and Polyphosphate Inline Filter. It is highly effective at reducing chlorine and other chemical disinfectants and pesticides and inhibiting scale. This filter has Polyphosphate Build in (supplied as standard). Other formats available at request (1/4″ female threaded ports). 

The Omnipure SCL10 Chlorine Filter With Scale Inhibitor can be used in undersink water filter systems, fridges, ice machines, water coolers, drinking fountains and reverse osmosis systems. The Omnipure SCL10 Chlorine Filter With Scale Inhibitor produces much better tasting water and controls lime and scale deposits.

 

Specifications

Model SCL10 Chlorine Filter With Scale Inhibitor
SKU 1500152102
Brand Osmio
Filter Parameter Chlorine, Limescale
In Depth The SCL10 Chlorine Filter With Scale Inhibitor uses GAC (Granular Activated Carbon) and Polyphosphate.

ANSI/NSF International Standards: Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odour Reduction and Chlorine Reduction Class I. The scale inhibiting properties of polyphosphates are affected by the chemistry of the water being treated and will vary.

Operating Specifications:

Capacity: 6 Months/1,250 Gallons – 4732 litres
Flow Rate: 0.50 GPM (1.9 LPM)
Maximum Pressure: 125 PSIG
Temperature: 35-100°F (2-38°C)
Dimensions: 2″ W x 10″ L
Boxed Weight: 1.7 KG

General Installation/Operation/Maintenance Requirements:

• Note flow direction of filter.
• For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon™ tape before installation. Install Teflon™ taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
• Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings.
• Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.

Special Notices

• The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
• “Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system.

Reviews

There are no reviews yet.

Be the first to review “Omnipure SCL10 Chlorine Filter With Scale Inhibitor”

Your email address will not be published. Required fields are marked *

Test

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.