Osmio Ultra-Ceram 3 Way Tap Filter Kit
The Ultra-Ceram 3 Way Tap Filter can be used with any 3 way tap on the market and including all of the 3 way taps we supply. We have the flexibility to change fittings as you require so please contact us about this if you need to.
The standard kit comes as follows:
1 of White Housing for 2.5 x 10 Inch (9 3/4″) Filter with metal bracket, spanner and screws
1 of Length of 1/4″ Tubing (2 metres) – we can swap this for 3/8″ if required (see options above)
1 of Feed-in valve with 1/2″ male and 1/2″ female – this is designed to go inbetween the flexible hose and copper pipe of the cold side connection.
1 of Tap Connector 1/2″ Male or Female to push fit tubing either 1/4″ or 3/8″
Ultra-Ceram 3 Way Tap Filter Dimensions:
Height (including bracket): 340mm
Width (at widest part): 115mm
Depth (at widest part): 115mm
Operating performance Working Pressure (for pressure use)
Minimum 10 Psi Maximum 125 Psi
NB. For a good flow rate we recommend a minimum incoming pressure of at least 3 bar unless you are using it on a separate tap in which case 2 bar minimum is fine.