Osmio Ultra-Soft 3 Way Tap Filter Kit
A great 3 way tap filter kit package that can be used with our range of three way filter taps
- Small Footprint – fits easily under most sinks
- Reduces limescale
- Removes Chlorine & heavy metals
- GAC/Phosphate & De-Alk Filter
We have the flexibility to change connection fittings as you require so please contact us about this if you need to.
The Osmio Ultra Soft standard kit comes as follows:
1 of GAC & De-Alk Filter – NSF Certified
1 of White Housing for 2.5 x 10 Inch (9 3/4″) Filter with metal bracket, spanner and screws
1 of Length of 1/4″ Tubing (2 metres) – we can swap this for 3/8″ if required (see options above)
1 of Feed-in valve with 1/2″ male and 1/2″ female – this is designed to go inbetween the flexible hose and copper pipe of the cold side connection.
1 of Tap Connector 1/2″ Male or Female to push fit tubing either 1/4″ or 3/8″
Height (including bracket): 340mm
Width (at widest part): 115mm
Depth (at widest part): 115mm
Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
Phosphate – for scale inhibition
De-alk resin – for temporary hardness and heavy metal reduction
The Osmio 2.5 x 10 Limescale & Chlorine filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin.
The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
We would recommend that your flow rate not exceed 4 LPM for the best contact time and filtration.